laser calibration

[Homer-Jay]

Can someone please remind me what the acceptable max error is for the laser calibration to the sphere. i'm thinking less than or equal to .015

[Admin]

I forget the firm numbers, but that is what I shoot for.

[Admin]

But you should probably specify what scanner you are using  ;)

[Homer-Jay]

perceptron scanshark. i am finally getting to the point that i can produce some decent models. i lose some curvature detail sometimes when i get into a hurry to finish one, but i'm not producing these for customers, just practicing.

[Jeff]

If I remember correctly it was .023 or .025 for the V4 and it was a little less for the V5. I have been using .023 I don't know if there is anything in the documentation or the videos (C:\Program Files\Perceptron\ScanWorks 5.4) but you could look. Please let us know if anyone finds it documented anywhere. Thanks!

[alarson1478]

We use the V4 and per the training manual provided at my ROMER hosted training the acceptable sphere calibration numbers are:

Average Error < .045 micron
Maximum Error < .150 micron

[Homer-Jay]

thank you