Print Page - Create a "point cloud" with a digitalization on IMInspect

Title: Create a "point cloud" with a digitalization on IMInspect
Post by: ViniciusSM on November 05, 2013, 01:01:08 AM

I have a digitalization made with IMInspect and need export it like a IMAling file, 'cause I need make it a "point cloud" and had no sucess on trying it.
I know how export it like sections on IGES format, but I need I need a point cloud on IGES or STL format. Could you help me?

P.S.: Sorry for the english.

Title: Re: Create a "point cloud" with a digitalization on IMInspect
Post by: Jeff on November 12, 2013, 10:09:59 AM

In IMInspect you can go to Tools - Data Objects - Wrap mesh around data objects. You will then have a mesh that you can export. I hope this helps

Jeff

Title: Re: Create a "point cloud" with a digitalization on IMInspect
Post by: ViniciusSM on June 02, 2014, 08:58:17 AM

I think I'm a litle late, but you helped very much. rs
I think it's the only way to get what I was needing, but your tip made me got it succesfully.

Thank you very much.

PointCloud.us - A PolyWorks Support Forum

PolyWorks Discussion => Inspector => Topic started by: ViniciusSM on November 05, 2013, 01:01:08 AM